News Blog

The latest news from HY-TEN.

Hy-Ten’s New Mesh Plant In Northern Ireland


Hy-Ten's new subsidiary, Hy-Ten Ireland, is located in Mallusk, just outside Belfast. It produces a complete range of Cares approved reinforcement meshes for sale throughout Northern Ireland and Eire.

For more information contact us on 02890 844954 or

Bamtec at the new National Children’s Hospital, Dublin


The latest edition of 'The Bamtec Report' features an article on the Bamtec reinforcement that Hy-Ten is supplying to the this 1.4 billion euros project in Dublin.

Bamtec Report

Hy-Ten Structural Steel at Gatwick Airport


Another load of structural steel going into Gatwick Airport. A fully assembled lift shaft ready for installation in the new departure lounge.


Hy-Ten's New Mesh Production Facility


Hy-Ten has completed the upgrade of its mesh reinforcement plant in Liverpool.   

With our new plant's high speed and quick change over times, Hy-Ten aims to provide a flexible  and cost effective mesh service to our UK customers.

A393 fabric coming off Hy-Ten's new mesh plant.


Hy-Ten Supplies Bamtec For Walls


Hy-Ten is supplying 400 tonnes of Bamtec to Khansaheb Civil Engineering for use in the walls of their Sport Society project in Dubai.

This project will be the largest sports mall in the world.

Click here to see a video of one of the Bamtec wall carpets being installed.

Hy-Ten Gabions at Brent in London


Here's our new Case Study for the gabion cladding Hy-Ten designed and supplied to O'Halloran & O'Brien’s project at Parkside Place, Brent.

ImageParkside Place Case Study

Hy-Ten achieves BES6001 Eco Reinforcement 'Very Good' rating.


Hy-Ten supplying Bamtec in The UAE


Hy-Ten is providing the Sobha Hartland project with 700t of Bamtec. This project is an 8 million sq.ft. residential development in Dubai.

Bamtec rolling out at Sobha Hartland

Hy-Ten’s Dynamic Loading Couplers receive Cares approval


The HT.FS & HT.FP couplers - for use in dynamic load applications such as bridge decks - are now Cares approved to TA1-A&B.

Cares Technical Approval Report TA1-A&B 5063

Hy-Ten Gabions at Kibworth, Leicestershire


View our Case Study for the gabion retaining wall Hy-Ten designed and supplied to John Littlejohn Designer Homes’ project at Kibworth

Gabions Case Study at Kibworth

Hy-Ten Turns 60.


Since 1958, Hy-Ten has supplied millions of tonnes of reinforcement bar, mesh and accessories to building and civil engineering contractors throughout the UK, Ireland and worldwide.

Thank you to our customers, employees and suppliers, past and present for making it possible.

The New HT.B Coupler is now in stock


The HT.B Coupler – Hy-Ten’s new bolt up coupler for applying to rebars on site is CARES approved and now in stock.

More Information

Hy-Ten's New Reinforcement Depot Serving the North East


Our new depot at Bowburn near Durham is now fully operational supplying Cares approved cut and bent, mesh and accessories. 

Click on Conatct Us for contact details.

HT Conti Rack - Hy-Ten’s New Reinforcement Continuity System


The HT Conti Rack is an alternative to traditional pull out bar systems which avoids the need for bending rebars twice. It is also very flexible in terms of bar diameters, shapes and centres, is quick to install and incorporates CARES approved rebar and couplers.

Hy-Ten's New Reinforcement Depot Serving The West Country


Hy-Ten has purchased KB Reinforcements which is located at Newton Abbot in South Devon.

KB is a long established supplier of reinforcement bar, mesh and accessories in the West Country.

Like all Hy-Ten’s factories, KB is Cares approved.

CARES Approval For Hy-Ten’s 18mm Reinforcement


Hy-Ten is now producing cold rolled 18mm reinforcement in grade 500B. We supply in up to 4 tonne coils, in straight lengths and as cut and bent.

Hy-Ten also produces 14mm reinforcement and the incorporation of these 2 non standard sizes into reinforcement designs can result in substantial tonnage savings.

New Addition To The HT Coupler Range


The HT.LT Coupler has just received CARES approval.

This new addition to the HT range is a positional coupler for use where extended length adjustment is required.

New Electronic Brochure For HT Reinforcement Couplers


The HT range has grown significantly and now includes CARES approved standard, positional and transitional couplers. It also includes mechanical anchors and couplers for welding to structural steelwork.

CARES Approval For HT Positional Couplers


Hy-Ten has received CARES approval for its HT Positional Couplers types HT(P) and HT(EP). Hy-Ten already had CARES approval for its Standard Coupler type HT(S).

The HT Coupler range offers substantial advantages over other coupler systems in terms of cost, quality and lead time.

Hy-Ten's New Reinforcement Depot Serving Scotland


Hy-Ten's new subsidiary, Central Rebar, is located in Alloa just above Edinburgh and supplies reinforcement bar, mesh and accessories throughout Scotland.

Like all Hy-Ten's factories, Central Rebar is CARES approved.

Click on Locations for contact details.

Main Sales Office

Opening Hours

Our sales offices are open weekdays (excluding bank holidays) from 8.30am to 5pm.