Threaded Lifting Loops and Eyes from Hy-Ten - suppliers of concrete reinforcement, bamtec, gabions, fencing, industrial mesh, galvanised lintels, structural steel, sheet piles

< Concrete Accessories - Precast Menu

Threaded Lifting Loops

All lifting loops are swaged on to a thread which is size dependant on the load required. The marking ring shows manufacturer, size and load rating and test certificate number. Loops are available with metric and Rd threads. If you need lifting loops with a longer wire load, let us know so that we can meet your individual specifications.

PLEASE NOTE - If there is any sign of wire breakage, thread damage, corrosion or sharp bends then the loop must be replaced immediately. All lifting loops must be assessed annually by an authorized engineer. Lifting inserts displayed in picture are sold separately.

Code	Thread (mm)	Load Rating (t)	Height (mm)
LL1222	12 X 22	0.5	155
LL1627	16 X 27	1.2	155
LL2035	20 X 35	2.0	215
LL2437	24 X 37	2.5	255
LL3050	30 X 50	4.0	300
LL3665	36 X 65	6.3	340
LL4270	42 X 70	8.0	425
LL5280	52 X 80	12.5	480

Threaded Lifting Eyes

These are used for axial and diagonal lifting applications. You can install these eyes with minimal space requirement and their construction allows complete rotation through 3600 degrees. When installing lifting eyes ensure that there is a flat surface and tighten by hand with a spanner. Available with metric and Rd threads. Available in three formats:-
Steel 1.00 x Thread Diameter
Cast Iron 1.25 x Thread Diameter
Aluminium 2.00 x Thread Diameter

Code	Load Rating (t)	Thread (mm)	Spanner Size
LE30	0.30	10	30
LE50	0.50	12	30
LE125	1.25	16	30
LE200	2.00	20	30
LE250	2.50	24	46
LE400	4.00	30	46
LE630	6.30	36	65
LE800	8.00	42	80
LE1250	12.50	52	80



HY-TEN Ltd : Head Office, 12 The Green : Richmond : Surrey TW9 1PX : United Kingdom

+44 (0)20 8940 7578 +44 (0)20 8332 1757 admin@hy-ten.co.uk



		Copyright © HY-TEN Ltd (2001 - 2008). All rights reserved.