Formwork Tie Bar System from Hy-Ten - suppliers of concrete reinforcement, bamtec, gabions, fencing, industrial mesh, galvanised lintels, structural steel, sheet piles.

< Concrete Accessories - Formwork Accessories Menu

Formwork Tie Bar System

An easy to use shuttering system produced from 15mm high tensile steel with a screw thread (deformation conforming to ASTMA 618 for reinforcing steel bars)

Waler Plate - Standard or Heavy Duty

Code	Size (mm)
20WP120	120 X 120 X 20
15WP120	120 X 120 X 15

Tie Bar

Code	Length (m)
TB60	6
TB25	2.5
TB20	2.0
TB17	1.75
TB15	1.50
TB10	1.00

Wing Nut

Code	Size (mm)
WN15	15
WN20	20

Hex Nut

Code	Size (mm)
HEX1525	15 X 25
HEX1550	15 X 50
HEX2060	20 X 60

Connector

Code	Size (mm)
CON1590	15 X 90
CON2040	20 X 140

Thruty Sleeve

Rigid PVC tube of 2mm wall thickness, supplied in 2 metre and 3 metre lengths which can be easily cut to the required size. Used as an expendable sleeve over tie bolts, facilitating their removal and also acting as a spacer to ensure correct width of wall. M

Code	Size (mm)
TS222	22mm id X 2m
TS223	22mm id X 3m
TS262	26mm id X 2m

Thruty Cones

Used at the ends of the thruty sleeve and can be easily extracted after removal of the formwork, to form a chamfered recess for subsequent grouting.

Code	Size (mm)
TC1510	15 X 10
TC2012	20 X 12



HY-TEN Ltd : Head Office, 12 The Green : Richmond : Surrey TW9 1PX : United Kingdom

+44 (0)20 8940 7578 +44 (0)20 8332 1757 admin@hy-ten.co.uk



		Copyright © HY-TEN Ltd (2001 - 2008). All rights reserved.